How to use APN to configure the camera in UBox APP?

SIM cards that are not included with the camera may not have their own APN.

Please try to configure the camera with APN by following the steps below:

1. Insert your SIM card into the camera correctly.

2. Restart the camera by turning on the power switch at the base of the camera.

3. Press and hold the reset button on the camera for 5 seconds to reset the camera.

4. Open the UBox APP and configure the camera using APN as shown below.

Tap “Next” and wait for the camera to connect.

If you still cannot add the camera after following the above steps, please confirm with the SIM card operator whether the SIM APN is correct.